E Catalogue

Multi-point lubrication systems Application perma NET is used for the lubrication of roller- and sliding bearings, drive and transport chains, guide ways, open gears and seals. In combination with different multi-point lubrication systems for different lubrication points, perma NET is extremely versatile. All lubrication points can be individually lubricated with the ideal lubricant and the optimal amount even in systems where lubrication points are great distances apart. Product characteristics Advantages Benefits NET GATEWAY / Internet browser - Central programming, monitoring, and control of the complete network - Prevents system downtimes and reduces costs Up to 100 network participants can be integrated Controls up to 600 lube-points - Monitoring of lubrication systems from any computer with internet access - Error/function messages via email / SMS - Integration of existing equipment possible - Less maintenance runs - Early reaction to problems - Increased flexibility - Reduced maintenance costs NET DRIVE with MP-6 distributor = a multi-point lubrication system - One system for up to 6 lube-points. - Different lubricants available, depending on application requirements - Remote installation with grease lines up to 5 m away from dangerous lubrication points - Less maintenance costs - Lets you choose the optimal lubricant for each application - Lowers the risk of workplace accidents Up to 1000 meters of cable possible - Long distances between the first and the last lubrication system possible - Central monitoring even for very distant lubrication points - Remote mounting of lubrication systems outside of hard to access areas increases workplace safety - Reduces operating and monitoring time > > > > Technical data Input voltage 90 V to 240 V AC Input current 1.2 A Frequency 47-63 Hz Lubrication systems NET DRIVE, NET DRIVE MP-6 STAR CONTROL, PRO C, ECOSY to be integrated via NET I/O Connections NET GATEWAY Ethernet 10/100 BaseT, RJ45-jack Connections NET I/O Four galvanically separated, digital inputs (24 V DC, 5 mA) Four potential free outputs (max. load 250 V AC, 16 A) Emission sound pressure level < 70 dB(A) Max. number of network participants 100, NET Drive and NET I/O to be used in any combination Max. number of lubrication points 600 Max. press. build-up (per lube-point) 25 bar Max. tube length (per lube-point) 5 m Communication perma NET CAN-Bus Max. cable length 1000 m Software Web-Browser-based perma NET Software, included in Firmware of NET GATEWAY Browser MS Internet Explorer ® , as of version 8.0, Firefox ® V3.5, Opera as of version 9.64 Standard-IP-Address 199.1.3.155 Standard-Netmask 255.255.255.0 > Refer to page 39 for part numbers ©2010 - perma-tec GmbH&Co. KG | www.perma-tec.com | 29