E Catalogue

Multi-point lubrication systems Application perma PRO MP-6 is suitable for the lubrication of roller- and sliding bearings, linear guides, open gears, spindles, motor shaft seals, generators, pumps, fans and linear guide systems in robots. Applications can be found in all types of industries: from steel to paper, heat and power stations, from mining to automotive. Product characteristics Advantages Benefits Lubricant cartridges LC units size 250 cm³ or 500 cm³ - Discharge periods of up to 24 months possible - Simple exchange without tools - Precise supply of lubricant to lubrication points - Less material / personnel cost Display with two buttons and LED - User friendly operation - Display shows remaining volume / active outlets / blocked outlets - Easy to program and change the discharge period and active outlets - The lubrication of critical lubrication points can be easily monitored MP-6 distributor - up to 6 outlets can be activated - Supplies up to 6 lube-points with the same amount of grease - If one or more grease points are blocked, the lubricator will continue to pump to the remaining points - The system does not shut down if one or more of the grease points are blocked (blocked grease points are identified) Pressure build-up max. 25 bar - Allows the use of tube extensions up to 5 meters per outlet - Remote mounting at hard to access lube-points or outside of dangerous areas increases workplace safety > > > > Technical data Housing Metal / transparent plastic Drive – reusable PRO MP-6: Battery operated PRO C MP-6: External power supply (15–30 V) Discharge periods 1 day to 24 months Lubricant volume 250 cm³ or 500 cm³ Operating temperature -20 °C to +60 °C Pressure build-up Max. 25bar Emission sound pressure level < 70 dB(A) > Refer to page 38 for part numbers PRO Mounting plate PRO Drive unit PRO LC unit MP-6 Distributor Connecting cable Tube connection for PRO tube 8 mm 10 cm 3 · 6 · 100 = 17.86 336 hours 17.86 = Selection of possible settings from the chart shown in chapt. 6.7 of the PRO/PRO C operating instructions. Calculation of total discharge amount for the correct discharge period setting: Total discharge amount in 100 h Number of lubrication points: 6 x Discharge amount per lubrication point: 10 cm³ = 5 strokes* Lubrication interval: every 14 days / 336 h * 1 stroke with a custom grease gun = approx. 1.5 g = 2 cm³ of lubricant ©2010 - perma-tec GmbH&Co. KG | www.perma-tec.com | 25