E Catalogue

Single-point lubrication systems Application perma STAR CONTROL TIME or perma STAR CONTROL IMPULSE are used for lubrication of roller- and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals and chains. These systems are ideal for applications that require lubrication to take place only when the machine is running in order to prevent over- lubrication. Connection to PLC is possible. perma STAR CONTROL TIME and IMPULSE protected against dust and water jets when the individual parts are assembled correctly. Product characteristics Advantages Benefits Machined controlled (e.g. PLC connection) - Control / feedback via machine / PLC connection - System only works when power is supplied by the machine - Continuous performance through optimal power supply - Flexible control / additional monitoring - Reliable discharge - Saves lubricant / avoids over-lubrication - No battery exchange necessary Each drive unit (Impulse/Time) works with all LC unit sizes 60, 120, 250 cm³ - Reusable drive units - Controlled and consistent lubrication delivering small amounts frequently - Transparent housing for visual fill level inspection - Less maintenance costs - Discharge amounts can be selected according to individual requirements and depending on machine operating time - Quick fill level control possible Pressure build-up to 5 bar - Can be remote mounted with flexible tube extensions (up to 3 meters) - Remote mounting at hard to access lubrication points or outside of danger- ous areas increases workplace safety > > > Technical data Housing Transparent plastic Drive – reusable Electromechanical Power supply External 15-30 V DC / typ. 0.2 A Discharge period STAR CONTROL TIME: Time controlled STAR CONTROL IMPULSE: Impulse controlled Lubricant volume 60 cm³, 120 cm³ or 250 cm³ Operating temperature -10 °C to +50 °C Pressure build-up Max. 5bar Emission sound pressure level < 70 dB(A) > Refer to page 37 for part numbers STAR CONTROL TIME Discharge amount in cm³ per 100 operating hours STAR CONTROL IMPULSE Discharge amount in cm³ per impulse LCunit S60 60 cm³ M120 120 cm³ L250 250 cm³ S60 60 cm³ M120 120 cm³ L250 250 cm³ Setting position of code switches Pause time h:min 1:30 8.33 16.67 34.72 2.11 4:37 2.78 5.56 11.57 1.06 9:17 1.39 2.78 5.79 0.53 18:36 0.69 1.39 2.89 0.26 21 43 43 21 21 43 43 21 43 43 Cable connection Drive unit Lubricant LC unit (transparent plastic) Piston Discharge amounts per discharge cycle: To select the correct LC unit size: > go to page 46 R1/4 outside thread ©2010 - perma-tec GmbH&Co. KG | www.perma-tec.com | 21