E Catalogue

Single-point lubrication systems Gas generator Piston Application perma FUTURA is suitable for single-point lubrication of roller- and sliding bearings, sliding guides, open gears, gear racks, spindles, shaft seals and chains. This lubrication system is ideal for areas that must be kept hygienically clean. Due to its resistance to corrosion it is especially suited for applications in the food industry. Product characteristics Advantages Benefits Translucent, non-corrosive plastic housing Fully water and dust proof - Shows remaining lubricant quantity - Ideal for corrosive environments - Ensures compliance with hygiene / environmental regulations - Users can easily monitor the position of the lubricant delivery piston - Can be used in areas with harsh operating conditions and in hygienically sensitive areas Permanent supply of lubrication points with the correct amount of lubricant - Discharges small amounts in short intervals - Reliable discharge for lubrication points that require little to moderate pressure at medium operating temperatures - Prevents accidental grease contamination - Less lubricant consumption and material costs Automatic lubrication with fresh, clean lubricant Remote mounting with flexible tubing possible - Less time needed for maintenance runs - Lubricates equipment during operation - Reduces wear / prevents contamination - Can be mounted up to 3 meters away from dangerous areas - Less workplace accidents - Uninterrupted operation - Reduces maintenance costs - Extents equipment service life - Increases workplace safety Ex-proof certification - Can be used in areas where explosive atmospheres may occur - Safe and reliable lubrication in dangerous areas > > > 100 cm³ at 0 °C 4 8 15 >18 at +10 °C 2 5 8 18 at +20 °C 1 3 6 12 at +30 °C 0.8 2 3 6 at +40 °C 0.6 1 2 3 Technical data Housing High grade plastics Drive Electrochemical reaction Discharge period at +20 °C with SF01 1, 3, 6 or 12 months Lubricant volume 100 cm³ Operating temperature 0 °C to +40 °C Pressure build-up Max. 4bar > Refer to page 36 for part numbers Activator screw Lubricant R 1/4 outside thread Electrolyte fluid 1) Translucent plastic housing Activator screw with pink sealing ring. To select the most suitable activator screw > go to page 46 1) environmentally friendly citric acid Discharge period in months: Time between activation and first discharge: 1 day > ©2010 - perma-tec GmbH&Co. KG | www.perma-tec.com | 15