E Catalogue

PAGE 6 PAX Pre-Pressurized Pre-Pressurized Tankless Systems Model 2T Model 6T Model 10T Model 14T Number of Distribution Pumps 1 to 2 1 to 6 1 to 10 1 to 14 Max. Lubrication Capacity (Std. Vol.) .021 oz. (0,62 mil) per Cycle x Number of Pumps Max. Lubrication Capacity (High Vol.) .042 oz. (1,24 mil) per Cycle x Number of Pumps Maximum Cycles/Min. (Full Capacity) 300 CPM (Higher speeds are possible with reduced spray volume) Operation Pressure 30 to 125 psi (205 to 860 kilopascal) Maximum Air Consumption .002 scfm per Cycle x Number of Pumps Voltage 115 VAC/60 HZ is Standard. Other voltages available upon request. Pre-Pressurized Dual Solenoid Systems Model 6T Model TS-2* Model 6-6T Model 30-6-6 1 to 2 1 to 12 1 to 12 Number of Distribution Pumps 1/Solenoid Max. of 6/Solenoid Max. of 6/Solenoid Tankless Units 30 Gallon Reservoir Capacity Reservoir Not Included (113,5 Liter) Max. Lubrication Capacity (Std. Vol.) .021 oz. (0,62 mil) per Cycle x Number of Pumps Max. Lubrication Capacity (High Vol.) .042 oz. (1,24 mil) per Cycle x Number of Pumps Maximum Cycles/Min. (Full Capacity) 300 CPM (Higher speeds are possible with reduced spray volume) Operation Pressure 30 to 125 psi (205 to 860 kilopascal) Maximum Air Consumption .002 scfm per Cycle x Number of Pumps Voltage 115 VAC/60 HZ is Standard. Other voltages available upon request. * The TS-2 unit does not include an FRL assembly or an electrical control. Multiple solenoid systems provide the ability to independently cycle the different banks of distribution pumps. This is most advantageous for transfer and long feed progression applications when a certain number of pumps need to be cycled multiple times or at varying times throughout the stroke. In cases where even greater control flexibility is required, Pax's V-Series system should be considered. Pax tankless systems can be utilized with central lubrication supply systems or to spray lubrication directly out of the drum or other customer supplied reservoirs. Model TS-2 Model 6-6T Model 30-6-6