E Catalogue

PAGE 5 LUBE SYSTEM Simple Volume Adjustment Volume of lubricant sprayed can be adjusted between .02 to less than .002 fluid ounces (0.621 to .068 cc). Higher volume pumps are available. No Priming Issues Pressurized lubricant is consistently supplied to the distribution pumps by a diaphragm pump located inside of the stainless steel reservoir filter. This design eliminates priming and maintenance issues associated with suction type systems. Distribution Pump (Tested for more than 100 million cycles) Filtered Supply Pump Airless Spray The standard system configuration utilizes individual, air driven distribution pumps which have a 10:1 air pressure to lubrication pressure ratio. The resulting "airless" spray better adheres to the material and results in less airborne lube than sprays that mix air with the lubricant. Applies High Viscosity Fluids The Pax system can operate from 30 psi (for light viscosity fluids) to 125 psi (for more viscous fluids). However, for higher viscosity (above 300 SUS), it is important to identify the supplier and viscosity of the fluid so Pax may provide the most efficient configuration for the application.