E Catalogue

PAGE 13 PAX In-Die Lubrication Components Pax Multi-Nozzle Bracket Mount Spray Assembly Includes stainless steel bracket, a mounting screw, a stainless steel washer and two of each of the following: spray nozzle, choice of spray tip retainer, check valve, and 1 / 8 " male elbow. (Requires ¼-20 tapped hole for mounting). Pax Part Numbers Pre-Pressurized V-Series H.P. Nozzle Piston Nozzle 5" 1.5" 3.5" N/A N/A 1.5" 5.3" 06-3120-30 Contact Pax 06-3126-30 6" 1.6" 3.2" 4.9" N/A 1.1" 6.3" 06-3121-30 Contact Pax 06-3127-30 7" 1.5" 3.5" 5.5" N/A 1.5" 7.3" 06-3122-30 Contact Pax 06-3128-30 8" 1.7" 4.0" 6.2" N/A 1.8" 8.3" 06-3123-30 Contact Pax 06-3129-30 9" 1.5" 3.5" 5.5" 7.5" 1.5" 9.3" 06-3124-30 Contact Pax 06-3130-30 10" 1.5" 3.7" 6.0" 8.2" 1.8" 10.3" 06-3125-30 Contact Pax 06-3131-30 Bracket Size Bracket Dimensions A B C D E F Pax Standard Bracket Mount Spray Assembly Includes stainless steel bracket, spray nozzle, choice of spray tip, tip retainer, check valve, 1 / 8 " male elbow, mounting screw and stainless steel washer. (Requires ¼-20 tapped hole for mounting). Pax Bracket Mount Spray Assemblies Pax bracket assemblies are the ideal way of permanently mounting spray assemblies. The spray angle can be adjusted by simply rotating either the nozzle and/or the bracket and the vertical height of the nozzle can be adjusted by moving the nozzle within the bracket slot. Once the position of the assembly is finalized, it is locked in place by tightening the bracket screws. Pax Part Numbers Pre-Pressurized V-Series H.P. Nozzle Piston Nozzle 1" to 2" 2.45" 06-3031-30 06-3134-30 06-3109-30 2" to 3" 3.45" 06-3032-30 06-3135-30 06-3110-30 3" to 4" 4.45" 06-3033-30 06-3136-30 06-3111-30 4" to 5" 5.45" 06-3034-30 06-3137-30 06-3112-30 5" to 6" 6.45" 06-3035-30 06-3138-30 06-3113-30 6" to 7" 7.45" 06-3036-30 06-3139-30 06-3114-30 7" to 8" 8.45" 06-3037-30 06-3140-30 06-3115-30 8" to 9" 9.45" 06-3038-30 06-3141-30 06-3116-30 9" to 10" 10.45" 06-3039-30 06-3142-30 06-3117-30 Bracket Size A A B C D E F A 1” 1.25” 1.86” In-Die Nozzle Assembly