E Catalogue

PAGE 12 PAX Spraying Assemblies Flextube Magnetic Base Spray Assembly The flextube assembly provide ultimate flexibility for positioning of the spray nozzle, however it can also be more easily moved out of position than either the magnetic base assembly or the bracket mount assembly. One Flextube assembly includes a 250 lb. magnet w/ bracket and release lever, flextube segments, 8’ of ¼” tubing, tubing nozzle assembly and male plug. Magnetic Base Spray Assembly Magnetic base provides flexibility for positioning the assembly as required and the rigid clamping and spraying assembly assures that the unit remains where it is positioned. The assembly includes a 250 lb. pull magnet with steel post, clamp assembly, stainless steel tube, female nozzle assembly with choice of spray tip, quick connect male plug and 8’ of ¼” tubing, Overview of Spray Lines Types Soft, plastic spray lines have the advantage of being highly bendable without kinking but, more rigid spray lines expand less under pressure and therefore provide a better spray pattern (especially for thicker lubrication). Pax offers three types of spray lines.: • Soft (Polyethylene) Tubing that can be used with the Pax Pre-Pressurized unit for lower viscosity lubricants. • Hard (Nylon) tubing that can be utilized on all Pax spray systems. • Steel Tubing, which provides the best spray results for thicker lubricants. Standard Spray Line Assemblies This 8’ long, ¼” spray line has a quick connect male plug on one end, (to connect to the Pax distribution pumps), and a spray nozzle (including nozzle body, check valve, tip retainer, and choice of spray tip) on the other end. The customer is responsible for determining mounting arrangement. Magnetic Base Spray Shield Pax Part number 00-2168-10 The spray shield provides an easy method to help contain die lubrication. The magnetic base holds the shield firmly in place and a built in scale provides an easy reference for setting shield height. Pax Part Numbers Spray Line Configurations Pre-Pressurized V-Series H.P. Nozzle Piston Nozzle Spray Line w/Soft (Polyethylene) Tubing 06-3009-30 06-3102-30 N/A Spray Line w/Hard (Nylon) Tubing 06-3010-30 06-3101-30 06-3008-30 Pax Part Numbers Pre-Pressurized V-Series H.P. Nozzle Piston Nozzle Flextube w/Soft (Polyethylene) Tubing 06-3017-30 Contact Pax N/A Flextube w/Hard (Nylon) Tubing 06-3018-30 Contact Pax 06-3016-30 Pax Part Numbers Pre-Pressurized V-Series H.P. Nozzle Piston Nozzle MBSA w/Soft (Polyethylene) Tubing 06-3013-31 06-3103-31 N/A MBSA w/Hard (Nylon) Tubing 06-3014-31 06-3104-31 06-3012-31 Low Volume MBSA w/ 1 / 8 " Hard (Nylon) Tubing 06-3023-31 Contact Pax Contact Pax Magnetic Base Spray Assembly Configurations Flexible Base Spray Assembly Configurations Standard Spray Line Assembly Magnetic Base Spray Assembly Flexible Magnetic Base