E Catalogue

52 VALVEMATE CONTROLLERS Multi-Valve Controller ValveMate ™ 8000 Automated dispensing stations run at maximum speed and efficiency when EFD dispense valves are operated by ValveMate controllers. The ValveMate 8000 Multi-Valve controller provides the primary control for deposit size and is used with all 702, 725, 736HPA-NV, 741 and 752 Series dispense valves. The controller is designed to bring fluid dispensing control close to the dispense valve, and provide numerous user-friendly features that simplify valve setup and operation. Capable of operating up to 4 dispense valves independently or simultaneously, the ValveMate 8000 controller and control air solenoids offer state-of-the-art features and capability, maximizing automated assembly machine efficiency and convenience. Features and Benefits • 4 independent programmable actuation channels • Maximum process control • “On the fly” deposit adjustment • Easily interfaced with a PLC • Fast-response pneumatic solenoids Specifications Cabinet size: 1 8.3 W x 5.1 H x 8.6 D cm (7.22" W x 2" H x 3.38" D ) Weight: .27 kg (.6 lb) Input AC (to power supply): 100-240 VAC, 50/60Hz Output voltage (from power supply): 24 VDC, 1.25 Amp maximum Power requirements: 24 VDC, 1.25 Amp maximum Feedback circuits: 5 to 24 VDC NC solid-state switch 100mA maximum Initiate circuit: 5 to 24 VDC signal Cycle rate: Exceeds 600 per minute Time range: Programmable .001 to 99.9 seconds Approvals: CE, CSA, RoHS, WEEE & China RoHS Compliant 7022004 (8000 Multi-Valve Controller) Includes controller, stand, panel mount bezel and spring clips, filter regulator, and air manifold assembly with pre-wired pressure sensor. For each ValveMate 8000 ordered, select the appropriate solenoid assembly for the number of valves used. Each solenoid kit includes the pre-wired 6 pin connector and housing, 3.6 m (12 ft) cable cordset, input air hose, and push-in fittings. Note: Order appropriate dispense valve and reservoir separately. Contact Nordson EFD for recommendations. Select the appropriate solenoid assembly for the number of valves used. 7022246 Single in-line solenoid for one valve operation. 7022247 Dual-solenoid block for two valve operation. 7022248 Tri-solenoid block for three valve operation. 7022249 Quad-solenoid block for four valve operation. www.nordsonefd.com info@nordsonefd.com USA & Canada 800-556-3484 Europe +44 (0) 1582 666334 Asia +86 (21) 3866 9006