E Catalogue

Combined Rubber-Airspring Insulator FAEBI ® for shock and vibration insulation of machines, equipment and sub-assemblies 21 Müller-Weingarten punching machine on FAEBI ® with level control A M D d H h Important Notice: The element must be chosen in such a way as not to exceed the maximum load! Inflation and deflation may be carried out under pressure only! Screw must be screwed in manually – do not use any wrench! Subject to technical changes! The mechanical-pneumatic relief valves are a simple yet effective solution. The level is constantly scanned by a plunger. The plunger position in transmitted to a slide valve. Depending on the slide valve position, pressure is applied to the air spring or the inside pressure is reduced. The level can be maintained at an accuracy ± 1/10 mm. Principally three control valves are used. A pressure control valve to limit system pressure to a maximum of 6 bar, water trap to remove vapour and an air filter to remove dust and any foreign bodies from the air supply. Protective cup: If the machine base does not cover Ø “d” fully we recommend the use our special protective cups. FAEBI ® 50 FAEBI ® 75 FAEBI ® 100 FAEBI ® 150 FAEBI ® 200 FAEBI ® 300 FAEBI ® 430 FAEBI ® 580 20 - 60 40 - 150 75 - 300 250 - 800 625 - 1500 1150 - 3400 2750 - 6500 5150 - 10400 load daN/pc. max. pressure / bar A mm 35 43 60 80 130 200 315 380 5 5 5 8 8 8 8 14 h mm d mm D mm 60 65 72 90 90 90 90 99 H approx. mm = workheight M 10 M 12 M 12 M 16 M 16 M 20 M 20 M 24 M type 80 97 118 170 236 340 480 650 110 115 135 200 260 370 500 680 3 3 5 6 6 6 6 6 FAEBI ® mechanical-pneumatic control valves