ACE

81 Issue7.2014 Specifications subject to change 81 ACE Controls Inc. · Tel. 800-521-3320 · (248) 476-0213 · Fax (248) 476-2470 · E-mail: shocks@acecontrols.com · www.acecontrols.com TUBUS-SeriesTypeTSBumper Axial Soft Damping d 1 d 2 D L 1 L 2 Max. Stroke M ​ Thecalculationandselectionof the requiredbumper shouldbe carriedout or beapprovedbyACE. OrderingExample TS44-23 TUBUSAxial Soft Outer- Ø 1.73" (44mm) Stroke 0.91" (23mm) Characteristicsof TypeTS44-23 6000 5000 4000 3000 2000 1000 0 3 6 9 12 15 18 Energy-StrokeCharacteristic (dynamic) (with impact velocity over 0.5m/s) Stroke (mm) Energy (Nm) Force-StrokeCharacteristic (dynamic) (with impact velocity over 0.5m/s) Stroke (mm) Force (N) With the aidof the characteristic curves above you can estimate theproportionof the total energy that will be absorbed. Example:With impact energy of 50Nm theEnergy-Strokediagram shows that a strokeof about 14mm is needed. On the Force-Strokediagram you can estimate theproportionof absorbed energy to rebound energy at this stroke length. Dynamic (v>0.5m/s) andstatic (v≤0.5m/s) characteristicsof all typesareavailableon request. absorbedenergy rebound stroke energy F in Fback 70 60 50 40 30 20 10 0 3 6 9 12 15 18 DimensionsandCapacityChart Type 1 E 3 in-lbs/Cycle 2 E 3 in-lbs/Cycle Max. Stroke inches D inches L 1 inches M L 2 inches d 1 inches d 2 inches Weight lbs TS14-7 17.7 26.6 0.28 0.55 0.16 M4 0.59 0.75 0.51 0.007 TS18-9 35.4 53.1 0.35 0.71 0.20 M5 0.71 0.94 0.63 0.013 TS20-10 53.1 62.0 0.39 0.79 0.24 M6 0.83 1.06 0.75 0.018 TS26-15 102 133 0.59 1.02 0.24 M6 1.10 1.46 0.98 0.033 TS32-16 204 230 0.63 1.26 0.24 M6 1.26 1.73 1.18 0.046 TS35-19 266 319 0.75 1.38 0.24 M6 1.42 1.89 1.30 0.062 TS40-19 301 372 0.75 1.57 0.24 M6 1.50 2.01 1.34 0.068 TS41-21 425 558 0.83 1.61 0.47 M12 1.61 2.17 1.50 0.112 TS44-23 558 637 0.91 1.73 0.47 M12 1.77 2.36 1.57 0.159 TS48-25 717 805 0.98 1.89 0.47 M12 1.93 2.52 1.73 0.190 TS51-27 814 1,009 1.06 2.01 0.47 M12 2.05 2.72 1.85 0.225 TS54-29 1,080 1,398 1.14 2.13 0.47 M12 2.17 2.87 1.97 0.256 TS58-30 1,319 1,363 1.18 2.28 0.47 M12 2.32 3.07 2.09 0.291 TS61-32 1,443 1,496 1.26 2.40 0.63 M16 2.44 3.27 2.20 0.448 TS64-34 1,841 2,248 1.34 2.52 0.63 M16 2.60 3.43 2.36 0.514 TS68-36 2,009 2,407 1.42 2.68 0.63 M16 2.72 3.62 2.48 0.547 TS75-39 2,576 3,611 1.54 2.95 0.63 M16 2.95 3.98 2.72 0.664 TS78-40 3,115 4,062 1.57 3.07 0.63 M16 3.11 4.13 2.83 0.747 TS82-44 3,708 5,487 1.73 3.23 0.63 M16 3.31 4.33 2.95 0.763 TS84-43 4,204 5,620 1.69 3.31 0.63 M16 3.35 4.53 3.07 0.886 TS90-47 5,133 6,886 1.85 3.54 0.63 M16 3.62 4.88 3.31 1.080 TS107-56 7,983 8,550 2.20 4.21 0.63 M16 4.33 5.79 3.94 1.616 1 Max. energy capacity per cycle for continous use. 2 Energy capacity per cycle for emergency use.