ACE

22 22 Issue7.2014 Specifications subject to change MiniatureShockAbsorbersSC²25 toSC²650 Self-Compensating Impact velocity range: SC25M5: 2.9 to14.7 ft/sec SC25M6: 0.99 to7.3 ft/sec SC25M7: 0.29 to2.3 ft/sec SC75M5: 2.9 to18.6 ft/sec SC75M6: 0.94 to7.1 ft/sec SC75M7: 0.29 to2.1 ft/sec SC190M5: 2.9 to18.3 ft/sec SC190M6: 0.98 to7.1 ft/sec SC190M7: 0.29 to2.2 ft/sec SC300, SC650: 0.30 to12.0 ft/sec Material: Shock absorber body: Nitridehardened steel. Accessories: Steel withblack oxide finishor nitride hardened. Piston rod: Hardened stainless steel. Mounting: In any position. If precise endposition is required, consider useof theoptional stop collar. Operating temperature range: 32 °F to150 °F On request: Corrosion-resistant WeartecPlus outer tube coating is standard. Other coatings and constructionmaterials are available upon request. ACEminiatureshockabsorbers aremainte- nance-free, self-containedhydraulic compo- nents. Thedesignof the SC²-Series units combines thepiston and inner tube into a single component and providesmore than double theenergycapacityof previous units in thesameenvelopesize . They have an integratedmechanical stop and are ideal for useonhandlingequipment, linear transfers, rodless cylinders, pneumaticpick andplace systems and rotationmodules etc. The smaller sizes up to typeSC²190, have adynamic membrane seal which allows direct installation into theend cover of pneumatic cylinders (for endpositiondampingmax. 101.53psi). The greatly increasedenergy capacity coupledwith overlappingeffectiveweight ranges covering from2.2 lbs up to13,999 lbsmakes the SC 2 -Series units ideal for rotary actuators. With theoptional side load adaptor fitted they can copewith the side loads up to25°. RollingDiaphragmSeal (TypeSC 2 190) Self-Retaining MainBearing PistonTube PistonCheckValve PressureChamberwithMeteringOrifices ReturnSpring OuterBody PistonRod with Integrated PositiveStop RodButton Locknut “Combinedpiston and inner tube– increasedenergy capacity up to200%!”